Positioning Systems

Featured Accessories

Smart Tether Positioning System For Pro 4 ROVs

Smart Tether by KCF Technologies is a complete ROV navigation and positioning system. The Smart Tether for the Pro 4 ROV system includes 130 feet (40 meters) of Smart Tether and is designed to meet multiple missions and tested to survive extreme environments. The ultra portable PC that is delivered with the Pro 3 systems is not necessary because the Smart Tether software is already integrated into the Pro 4 PC. No transponders, measuring, or difficult set-up is necessary since the sensors, or “nodes”, are embedded in the tether. It’s a complete “drop and go” system. For operations requiring extended reach beyond 130 feet, a 260 foot (80 meter) extension is available for an additional $4,500.00 USD.

SMART TETHER FIELD OPERATION EXAMPLE

SMART TETHER FREQUENTLY ASKED QUESTIONS

Available for: P4 PS 300BASE, P4 PS 300XPS, P4 CD 300BASE

Download Spec Sheet

Smart Tether Positioning System For Pro 3 ROVs

Smart Tether by KCF Technologies is a complete ROV navigation and positioning system. The Smart Tether system includes 130 feet (40 meters) of Smart Tether, control box, and software which is designed to meet multiple missions and tested to survive extreme environments. No transponders, measuring, or difficult set-up is necessary since the sensors, or “nodes”, are embedded in the tether. It’s a complete “drop and go” system. For operations requiring extended reach beyond 130 feet, a 260 foot (80 meter) extension is available for an additional $4,500.00 USD.

SMART TETHER FIELD OPERATION EXAMPLE

SMART TETHER FREQUENTLY ASKED QUESTIONS

Available for: Pro 3 E, Pro 3 S, Pro 3 XE, Pro 3 GTO

Download Spec Sheet

MicronNAV USBL Positioning System

The TriTech MicronNAV system is an innovative USBL (Ultra Short Baseline) positioning system designed for small vehicles like the VideoRay Pro 3 XE GTO. It can be used in conjunction with the SeaSprite Scanning sonar and is comprised of a subsea MicronNav unit, a surface USBL transducer unit with integral Magnetic Compass and Pitch/Roll Sensors, a surface MicronNav 100 Interface module and operating software under control of the topside PC/Laptop. The MicronNAV is delivered with a VideoRay integration kit which can be set up in responder mode (for use with the SeaSprite) or Transponder mode for use with other accessories.

Available for: Pro 3 E, Pro 3 S, Pro 3 XE, Pro 3 GTO

Download Spec Sheet

Smart Tether Diver Navigation & Positioning System

The Smart Tether Diver System uses KCF’s tether based positioning technology to provide navigation & positioning for divers, without the need for any external sensors or complicated setup. The Smart Tether for Divers also has a high working strength, making it suitable for use as a safety tether. Diver Smart Tether is compatible with VideoRay ROVs

Features:

Quick Setup for improved response time

Real Time Tether Position / Shape

Real Time Heading & FOV Mapping

Advanced Scan Area Tracking & Target Marking

Simple exporting of data to Google Earth

Optional OTS Mask and intercom system

Available for: P4 PS 300BASE, P4 PS 300XPS, P4 CD 300BASE, Pro 3 GTO

Download Spec Sheet

AquaMap Shiphull Inspection System

AquaMap Shiphull tracks the VideoRay’s location relative to a vessel or dock in real time using 4 battery powered remote baseline stations. The system displays the VideoRay’s location and its path on an image of the vessel or dock being inspected. The system plugs into the accessory port and only works with the Pro and Deep Blue models. The system is delivered with a skid mounted mobile station, software and connection cables. A computer is required but not included.

Available for: Pro 3 E, Pro 3 S, Pro 3 XE, Pro 3 GTO

AquaMap Seafloor Long Baseline (LBL) Positioning System

AquaMap Seafloor tracks the VideoRay’s location in real time using 4 battery powered remote baseline stations and includes GPS integration and chart overlay. The system plugs into the accessory port and only works with the Pro and Deep Blue models. The system is delivered with an accessory float block, software and connection cables. A computer is required but not included.

Available for: Pro 3 E, Pro 3 S, Pro 3 XE, Pro 3 GTO

ACCESSORIES

WHY VIDEORAY?

AFFORDABILITY

With ROVs starting under $10,000 (in the US), the cost is quickly justified when compared to commercial dive missions or funding the purchase, mobilization, staffing, and operation of larger ROVs.

PORTABILITY

One person can transport the tiny 8-pound sub, control box and tether. The Scout system weighs less than 70 pounds and packs neatly in one rolling Pelican case. All other systems fit in two Pelican cases that can be transported in a car trunk or helicopter, or checked as airline baggage.

USABILITY

Driving the VideoRay is similar to operating a video game. A specially trained ROV pilot is not needed. (In fact, kids raised on video games routinely put adults to shame piloting VideoRay.). VideoRay is equally at home with a search and rescue team as it is with a yacht owner enjoying live views of a coral reef in St. Thomas. Additional controls on advanced models include front camera focus and tilt, rear camera selection and automatic depth holding (see the product detail pages for complete lists of features and capabilities of each model).

SAFETY

Since VideoRay uses less than 500 watts of power, a car or marine battery with inverter, small gasoline generator, or any 100-240 VAC outlet powers the control box and submersible. The current running through the tether to the submersible is a comparatively safe 48 VDC, rather than the possibly lethal 360-plus VDC used by other ROVs. This makes it safe for divers to handle the submersible in the water, and for kids to swim with it in a pool.

REACH

Standard tether lengths vary by model, but additional neutral, negative, and positively buoyant tethers can be added to extend the overall reach of the VideoRay up to 1,100 feet. Tethers are available in a variety of lengths to meet the needs of particular water conditions or projects.

THE VALUE IN VIDEORAY PRODUCTS

Durability

VideoRay's design has been perfected over years of extensive field experience. VideoRays have been deployed all over the world - from the warm, clear, calm waters of the Caribbean to hostile environments in the Arctic. VideoRays have been used in water too polluted for humans and in many places too confined or dangerous for divers to enter.

Materials and construction

Tough materials -- acrylic domes, anodized aluminum, stainless steel, and Kevlar - used in the VideoRay ensure it will withstand repeated and extended use. The careful assembly, quality controls, and pressure testing in our assembly plants ensure that each unit will continue to provide service for years.

Research and development

Our ongoing R&D, extensive spare parts supplies, and trained technicians ensure that our customers stay productive with VideoRay technology for years to come.

Warranty

Every VideoRay comes with a two-year, bumper-to-bumper warranty. This covers any failure due to defects in materials and workmanship, so long as maintenance described in the manual is performed. VideoRay also offers an Extended Warranty Program. This meets the needs of our many customers who need a plan where they can count on absolute minimal downtime, a known cost for all repairs and maintenance, and an assurance of the latest technology at all times. Please click here to learn pricing and details about our Extended Warranty Program

Quality cameras

All VideoRays come equipped with a color camera. The Scouts use a fixed 420 line, 0.3 lux color camera, accompanied by two 20-watt adjustable halogen lights. The Explorers, Pro and Deep Blue Series come with high resolution 570 line, 0.1 lux color cameras, which can be tilted 160 degrees. The Pro and Deep Blue models also include rear-facing black and white cameras with 430 lines, 0.1 lux and a high-powered LED array for illumination.

Sensors

All models, except the Scout Series, include compass, depth sensor and auto depth holding capability. Pro and Deep Blue models can be augmented with a wide assortment of accessories, including grippers, positioning systems, scanning sonar and other sensors. Computer control and instrumentation are available, along with many customizations to meet the needs of diverse underwater professions.

Depth

Scouts and Explorers are depth rated to 76 m (250 ft). The Pro models are depth rated to 152 m (500 ft), and the Deep Blue 305 m (1000 ft).

Weight

The submersible units all weigh less than 4 kilograms (9 pounds) out of the water, and each can be easily deployed by a single person by simply hanging it from its tether and lowering it in the water. The total system weight ranges from 32 kilos (70 pounds) for the Scout to 81 kilos (180 pounds) for the Deep Blue.